Part Number WS 1.2516
Technical Data Sheet
Part Number WS 1.2516 is a hardenable silver steel. SG Extra material is Manufactured in Rod, Bar and coil (WS 1.2516 Silver Steel).
Chemical Composition Limits | |||||||
Weight % | C | Cr | Mn | V | Si | Tu | Fe |
SG-EXTRA | 1.15-1.25 | 0.15-0.25 | 0.20-0.35 | 0.07-0.12 | 0.15-0.12 | 0.90-1.10 | Rem |
Other Chemically similar Specifications | |||||||
Weight % | C | Cr | Mn | V | Si | Tu | Fe |
WS 1.2516 | 1.15-1.25 | 0.15-0.25 | 0.20-0.35 | 0.07-0.12 | 0.15-0.12 | 0.90-1.10 | Rem |
DIN 120WV4 | 1.15-1.25 | 0.15-0.25 | 0.20-0.35 | 0.07-0.12 | 0.15-0.12 | 0.90-1.10 | Rem |
AISI F1~ | 1.15-1.25 | 0.15-0.25 | 0.20-0.35 | 0.07-0.12 | 0.15-0.12 | 0.90-1.10 | Rem |
Material Features:
This product is a steel for tools and die making part. The high content of carbon grants a hardening to the core, even for bid diameters. It is a steel for upper class tools: The low content of sulphur will allow the welding of this material.
Availability
coils: Cold drawn + polished: 10-35kg/coil
Bars: Ø0-1.99mm: cold drawn and polished
Bars: Ø 2.00-40mm: cold drawn, ground and polished
Bar Lengths: 2m (3m) Surface roughness N5-N6
Tensile Strength
about 750 N/mm2
Standard tolerances
Diameter : h8
Out of Roundness/eccentricity: 1/2 of dia tolerance
Tolerance in length: +/-30mm
Heat treatment
Hardening water :790-810 ºC above dia 10mm
Oil: 810-830 ºC above dia 10mm
Max obtainable hardness 64-66 HRC
Cutting rate
10-20m/min (approximate value, depending on the lubrication oil, the cutting tools, the shape of parts.